M22 · Level IV — Autonomous & Embodied Intelligence
Robotics & Embodied Intelligence
Understand and engineer embodied intelligent systems by connecting physical geometry, sensing, estimation, dynamics, control, planning and learning into one closed-loop system.
Topics
Technical concepts
- 01Robotics as a Closed-Loop System
- 02Coordinate Frames
- 03Rotation Representations
- 04Homogeneous Transforms
- 05Lie Groups and Lie Algebra Bridge
- 06Velocities and Twists
- 07Sensor Fundamentals
- 08Sensor Measurement Models
- 09Calibration
- 10Forward Kinematics
- 11Inverse Kinematics
- 12Jacobians
- 13Singularity Analysis
- 14Robot Dynamics
- 15Lagrangian Formulation
- 16Manipulator Dynamics Form
- 17Trajectory Generation
- 18Polynomial Trajectories
- 19Feedback Control
- 20Stability as a Control Requirement
- 21Feedforward + Feedback
- 22State-Space Representation
- 23Kalman Filtering
- 24Extended/Unscented Filtering
- 25Sensor Fusion
- 26Dead Reckoning and Drift
- 27Mapping and Occupancy
- 28SLAM: Simultaneous Localisation and Mapping
- 29Localisation vs Mapping
- 30Motion Planning
- 31Configuration Space
- 32Sampling-Based Planning
- 33Manipulation and Grasping
- 34Contact Dynamics and Compliance
- 35Locomotion
- 36Whole-Body and Hierarchical Control
- 37Real-Time Constraints
- 38Simulation and Digital Environments
- 39Sim-to-Real Transfer
- 40Domain Randomisation and System Identification
- 41Learning in the Loop
- 42Embodied Multimodal Intelligence
- 43Behaviour Trees, FSMs and Task Logic
- 44Safety and Runtime Shields
- 45Failure Modes in Embodied Systems
- 46Quantum Technology Bridge: Hybrid Robotics
Practical implementation
- 01Laboratory I: Frame and Transform Engine
- 02Laboratory II: Forward/Inverse Kinematics
- 03Laboratory III: Dynamics Simulator
- 04Laboratory IV: Trajectory Tracking Controller
- 05Laboratory V: State Estimation
- 06Laboratory VI: Sensor Fusion
- 07Laboratory VII: Mapping and Planning
- 08Laboratory VIII: Manipulation/Contact Simulation
- 09Laboratory IX: Sim-to-Real Stress Test
- 10Laboratory X: Closed-Loop Embodied Intelligence
Tools and technologies
Project
Closed-loop system with safety monitor and robustness evidence
Expected learning outcomes
- 01Can represent poses, frames and rigid transforms.
- 02Can derive and solve kinematics and analyse Jacobian singularities.
- 03Can formulate and simulate robot dynamics.
- 04Can generate and track feasible trajectories.
- 05Can design and analyse closed-loop controllers.
- 06Can estimate state under noisy sensing.
- 07Can fuse complementary sensors and detect drift.
- 08Can construct maps and plan collision-free motion.
- 09Can reason about contact, manipulation and locomotion constraints.
- 10Can analyse simulation fidelity and sim-to-real transfer.
- 11Can integrate learned components without removing physical safety constraints.
- 12Can produce a reproducible embodied-system evidence package.
Assessment
- 01Daily practice
- 02Laboratories
- 03Research reproduction
- 04Integrated project
- 05Technical viva
- 06Engineering record
Source document: TUTOR Frontier Module 22 Robotics Embodied Intelligence